Order By Phone 1-855-636-2823 - Mon-Fri 10:30am to 5:00pm

Single Color LED Strip Kit with AC Dimmable Magnetic Driver

Single Color LED Strip Kit with AC Dimmable Driver

CODE: SCMAGDIM

$ 102.27

In stock

Single Color LED Strip Kit with AC Dimmable Magnetic Driver

Finally!! You can dim your single color LED strips with a compatible, standard looking wall dimmer by using the high quality AC Dimmable Magnetic Driver from Magnet Montreal. No need to use a different 12V dimmer and a remote to adjust your LED strip kits, all you need is to get the Magnetic Power Supply hardwired to a compatible wall dimmer and voilà! Highly efficient, this LED Driver allows you to dim your LED Strips from 100% all the way down to 10%.

Magnet Montreal offers you the option of adding a wall dimmer to your kit, you can select it in the drop down menu. The model we offer is the Leviton 6613. If you decide not to include the suggested wall dimmer, you need to make sure your dimmer is compatible by going through the list of compatible dimmers here. Any attempt to operate this power supply with a non compatible dimmer may damage the unit and will void its warranty.

The drop down menus allow you to pick your prefered length and type of LED strip to perfectly match your needs! The menu offers you 2 types: standard brightness (3528) or ultra bright (5050).

Once you have determined which type of LED Strip you want, you will have to decide which color you prefer. All LED Strip kits come in Warm White (3200K) or Cool White (6000K). However, if you have chosen a standard brightness 3528 strip kit, you will also have the possibility of getting your Single Color LEDs in Red, Blue and Green on top of the two standard whites.

For any kit your order, you will receive the required magnetic driver according to the type and length of LED strip that you chose. Here's how it is determined:
40W LED Driver: 5 meters or less of 3528 Strips 
60W LED Driver: 6 to 10 meters of 3528 LED strip or up to 5 Meters of 5050 LED Strip. 
100W LED Driver: 11 to 20 meters of 3528 Strips or 6 to 10 meters of 5050 LED Strip.

You already have a LED strip setup at home and you wish to upgrade it and use a standard looking wall dimmer? You can easily do so by ordering the proper AC Dimmable Magnetic Driver here. Make sure you order the right one to fit the Amp needs of your existing type and length of strip.

If you are looking to install your LED strip kit in an outdoor environment, the Dimmable Magnetic Driver is suitable for for the exterior, but the IP65 Strips aren't. So, we strongly suggest ordering an IP68 Submersible Single Color LED Strip Kit with AC Dimmable Magnetic Driver, which has a better protection against humidity as the strips are completely encased in silicon.

Note that if you're planning on installing your LED strip sideways or upside down, we strongly suggest using extra adhesive such as double sided tape.

For every 15m-20m 3528 kit or 10m 5050 kit, your package will include a Y shape splitter, which you need in order to split your circuit as evenly as possible. On longer circuits like these, the light might tend to get dim on the ends if power isn't distributed evenly.

IMPORTANT NOTE: Since the AC Dimmable Magnetic Driver has to be hardwired into the wall dimmer using 110-120V power, it requires to be installed by a qualified professional.

Q: I want to install LED strips under my cabinets but I have to go around my stove fan or microwave, can I cut and reconnect my LED strip? 
A: Yes you can cut and reconnect your strip, to know how it’s done, visit the how to use solderless connectors page

 

PDF Iconinstallation_guide_12V.pdf  PDF IconDimmer Compatibility List.pdf

PDF IconSpecsheet 40W.pdf  PDF IconSpecsheet 60W.pdf  PDF IconSpecsheet 100W.pdf

 

 

Magnetic Dimmable Power SupplyConnection Diagram Magnetic Dimmable Power Supply

No FAQ found, submit a question!

Loading...