COVID-19 update: The store is open to the public see details.

Cool White Submersible ip68 LED Strip kit (300 LED)

Cool White Submersible ip68 LED Strip kit (300 LED)



In stock

Cool White Submersible ip68 LED Strip kit (300 LED)

Magnet Montreal now offers you the possibility of building your own Cool White Submersible ip68 LED strip kit (6000K), perfect for outdoor applications. As opposed to regular ip65 LED strips, which are spill proof, the ip68 submersible strip is completely encased in silicon, protecting it from any liquid or humidity.

Start by choosing your dimmer/controller from the options available. From the simple wired switch all the way to our new RF (Radio Frequency) micro controller that comes with an advanced 11 key, without forgetting our wall dimmers, multi-zone controller and the classic RF dimmer that comes with a 3 key remote, we have the ideal dimmer for your project.

You can then choose the length of your LED Strip and the brightness levels: standard (3528) or ultra bright (5050). Please note that for the kits with the wall dimmer, wireless wall dimmer or RF 3 key dimmer, you can't put more than 10m of 3528 or 5m of 5050 on the same circuit. If you wan't 15-20m of 3528 or 10m of 5050, you need to get the on-off switch, the RF 11 key dimmer or the Multi-Zone controller.

Magnet Montreal also makes it possible for to make your 5 meter Single Color LED Strip of 3528 Brightness completely mobile with the battery pack. Note that only the standard electrical power pack is available for all other LED Strips and for all 10 meter Strips.

Note that only the LED strip is water proof, the connectors at both ends of the strip, the controller and power supply are not waterproof and must not be in contact with water or moisture. 

The iP68 strips are not self adhesive, to maintain them in place we suggest using GE pure silicone and double-sided adhesive tape. Simply put the silicone on the back of the strip, then put the double-sided tape on top of the silicone. Once the silicone is dry, your strip is ready to install! Additional option when looking for a sharp and subtle way to hold your ip68 LED strips, the Silicone Mounting Brackets for LED Strips from Magnet Montreal are a great solution.

 If you are looking to install ip68 submersible LED strips to your awning, pool, deck, RV, boat, docks, or anything of that nature, we invite you to read our page on how to install your under awning LED strips.

Want the light to turn on automatically when someone's around? Use the PIR Motion Detector with your LED Strip bundle, it's a super effective add-on piece!

For every 15m-20m 3528 kit or 10m 5050 kit, your package will include a Y shape splitter, which you need in order to split your circuit as evenly as possible. On longer circuits like these, the light might tend to get dim on the ends if power isn't distributed evenly.

Q: I want to install LED strips under my cabinets but I have to go around my stove fan or microwave, can I cut and reconnect my LED strip?
A: Yes you can cut and reconnect your strip, to know how it’s done, visit the how to use solderless connectors page

Note about the 3 key dimmer:
If the dimmer is not connected properly, the strip will turn on but the remote won’t work. In order for the remote to work, you need to connect the power supply in the dimmers INPUT, the strip connects in the OUTPUT. If once connected properly the remote doesn’t work, keep the on/off button pushed down for about 30 secs. That will resync the dimmer with the remote.

Click here for detailed instructions on how to install and make your dimmer work properly.

No FAQ found, submit a question!